Tutélis Délest
Dynamic load shedding module: it continuously measures the building's consumption and adjusts the charging station's power so that you never exceed your subscribed capacity. No more power cuts when the oven starts.
The Tutélis Délest means you don't have to increase your subscribed power to charge a vehicle. The module measures the total consumption of the home or premises and leaves the charging station whatever power remains available, second by second.
When the oven, the water heater and the heat pump run at the same time, charging slows down. As soon as one appliance stops, charging returns to full power.
Key features
- Measurement with split-core sensors, without cutting the main power supply
- Compatible with Ampéa 7, Ampéa 11 and Ampéa 22 Pro charging stations
- Direct reading of the smart meter's remote data output (teleinformation), when available
- Threshold adjustable from 15 to 63 A with a rotary coding switch
- Connection to the charging station by a simple twisted pair, up to 100 m
Technical specifications
| Specification | Value |
|---|---|
| Compatible networks | Single-phase 230 V and three-phase 400 V |
| Measured current | Up to 63 A per phase |
| Sensors | 3 split-core sensors supplied |
| Response time | Less than 2 seconds |
| Size | 2 DIN rail modules |
| Protection rating | IP20, to be installed in an enclosure |
| Warranty | 2 years |
When to install it
Load shedding is useful as soon as the combined power of the home and the charging station exceeds your subscribed capacity. This is almost always the case with a 6 or 9 kVA contract and a 7.4 kW charging station.
-
ReferenceWAT-TUT-DEL
-
AlimentationMonophasé 230 V, Triphasé 400 V
-
Indice de protectionIP20
-
Calibre63 A
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent