Tutélis 40 A type A
Pre-wired protection enclosure for a single-phase charging station up to 7.4 kW: 30 mA type A residual current device and 40 A circuit breaker, in an IP65 weatherproof housing.
The Tutélis 40 A type A combines in a single enclosure the two protections required at the head of a single-phase charging line. It arrives wired and labelled: the installer only has to connect the incoming supply and the outgoing line to the charging station.
It suits all charging stations that have their own built-in detection of DC leakage currents, such as the Ampéa 7.
Enclosure contents
- One 2-pole 40 A, 30 mA, type A residual current device
- One 2-pole 40 A circuit breaker, C curve, 6 kA breaking capacity
- An earth terminal block and linking busbars
- An identification label “Electric vehicle charging”
- Two cable glands for cables up to 3 × 10 mm²
Technical specifications
| Specification | Value |
|---|---|
| Operating voltage | 230 V single-phase |
| Rated current | 40 A |
| Residual current sensitivity | 30 mA, type A |
| Breaking capacity | 6 kA |
| Enclosure | 4 modules, transparent door |
| Protection rating | IP65 |
| Compliance | NF C 15-100, IEC 61008-1 |
| Warranty | 2 years |
When to choose type B
If the charging station does not detect DC leakage currents itself, the standard requires a type B residual current device. In that case, or for three-phase installations, choose the Tutélis Tétra type B enclosure.
-
ReferenceWAT-TUT-40A
-
AlimentationMonophasé 230 V
-
Indice de protectionIP65
-
Calibre40 A
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent