Ampéa 11
11 kW three-phase wall-mounted charging station, for homes with a 400 V supply and shared parking spaces in condominiums. Same IP55 and IK10 enclosure as the Ampéa 7, with automatic balancing across the three phases.
The Ampéa 11 uses the compact enclosure of the Ampéa 7 and adapts it to three-phase installations. With 11 kW available, it charges a 60 kWh battery in about six hours, without putting heavy strain on the building's electrical network.
This is the model we recommend for condominiums: the power level remains reasonable for the common-areas distribution board, and the charging station can be controlled by a shared energy manager.
Key features
- Three-phase charging at 16 A per phase, i.e. 11 kW continuous
- Type 2S socket with shutters and connector locking
- Built-in 6 mA DC leakage current detection
- Control input for off-peak hours or an energy manager
- Can operate in single-phase mode at 3.7 kW if only one phase is connected
Technical specifications
| Specification | Value |
|---|---|
| Maximum power | 11 kW |
| Power supply | Three-phase 400 V, 16 A per phase |
| Socket | Type 2S with shutters, compliant with IEC 62196-2 |
| Charging mode | Mode 3 according to IEC 61851-1 |
| Protection rating | IP55 |
| Impact resistance | IK10 |
| Connection cross-section | 2.5 to 10 mm² |
| Warranty | 3 years |
Installation
The charging station is connected to a dedicated line protected by a 30 mA residual current device and a four-pole circuit breaker. The Tutélis Tétra enclosure brings these protections together, already wired. It is rated for 22 kW: by running the line in 10 mm², you can later switch to an Ampéa 22 Pro without modifying the distribution board. As with any charging station above 3.7 kW, installation must be carried out by an IRVE-qualified installer, in compliance with the NF C 15-100 standard.
-
ReferenceWAT-AMP-11
-
Puissance de charge11 kW
-
AlimentationTriphasé 400 V
-
Type de priseType 2S à obturateurs
-
Indice de protectionIP55
-
Résistance aux chocsIK10
-
Calibre16 A
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent