Ampéa Duo 22
Freestanding station with two 22 kW charge points, for company car parks, shops and local authorities. Two vehicles charge at the same time, each with its own MID meter.
The Ampéa Duo 22 serves two parking spaces with a single post and a single trench. Each side has its own Type 2S socket, badge reader and meter, so the two charging sessions are tracked separately.
The powder-coated galvanized steel body withstands bumper impacts and everyday vandalism. The charging station is designed to stay in service for ten years outdoors, including in seaside locations.
Standard equipment
- Two Type 2S sockets with shutters, one per side
- Two MID-certified energy meters
- RFID badge reader on each side, ten badges supplied
- OCPP 1.6 J communication via Ethernet, 4G modem optional
- Automatic power sharing when the supply is limited
- Lighting of the connection area
Technical specifications
| Specification | Value |
|---|---|
| Maximum power | 2 × 22 kW |
| Power supply | Three-phase 400 V, 63 A |
| Sockets | 2 × Type 2S, compliant with IEC 62196-2 |
| Charging mode | Mode 3 according to IEC 61851-1 |
| Metering | 2 MID-certified meters, class B |
| Protection rating | IP55 |
| Impact resistance | IK10 |
| Height above ground | 1.40 m |
| Warranty | 3 years, extendable to 5 years |
Installation
The charging station is fixed with four anchor rods to a concrete base. The Stabéo Béton precast base is delivered with its conduits and template, so no on-site formwork is needed. The connection is made through the post, to a 25 mm² terminal block. Delivered on a pallet; unloading must be arranged.
-
ReferenceWAT-AMP-D22
-
Puissance de charge2 × 22 kW
-
AlimentationTriphasé 400 V
-
Type de priseType 2S à obturateurs
-
Indice de protectionIP55
-
Résistance aux chocsIK10
-
Calibre63 A
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent