Ampéa 22 Pro
22 kW three-phase charging station for company car parks and fleets: RFID badge reader, MID-certified energy meter and remote monitoring via OCPP 1.6 J.
The Ampéa 22 Pro is our wall-mounted charging station for professional use. It delivers 22 kW in three-phase and identifies each driver by badge, so you can allocate consumption between departments, employees or visitors.
Its MID-certified energy meter provides a legally valid reading, essential for rebilling electricity or reimbursing an employee. The charging station connects to a monitoring tool via the OCPP 1.6 J protocol, over Ethernet or Wi-Fi.
Standard equipment
- RFID badge reader, supplied with five programmed badges
- MID-certified energy meter, readable on the front panel
- OCPP 1.6 J communication via Ethernet or Wi-Fi
- 6 mA DC leakage current detection
- Dynamic power management between several charging stations, up to sixteen charging points
- Type 2S socket with shutters and locking
Technical specifications
| Specification | Value |
|---|---|
| Maximum power | 22 kW |
| Power supply | Three-phase 400 V, 32 A per phase |
| Socket | Type 2S with shutters, compliant with IEC 62196-2 |
| Charging mode | Mode 3 according to IEC 61851-1 |
| Metering | MID-certified meter, class B |
| Communication | OCPP 1.6 J, Ethernet RJ45 and Wi-Fi 2.4 GHz |
| Protection rating | IP55 |
| Impact resistance | IK10 |
| Warranty | 3 years, extendable to 5 years |
Installation
The charging station mounts on a wall or on a Stabéo Solo stand. It requires a dedicated 10 mm² line protected by the Tutélis Tétra enclosure. Commissioning and monitoring setup must be carried out by an IRVE-qualified installer.
-
ReferenceWAT-AMP-22P
-
Puissance de charge22 kW
-
AlimentationTriphasé 400 V
-
Type de priseType 2S à obturateurs
-
Indice de protectionIP55
-
Résistance aux chocsIK10
-
Calibre32 A
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent